28002 – Jet-Lube MP-50 1/2 lb Brushtop Can

Moly Paste

MP-50 is a non-melting, lubricating compound containing a high percentage of low-friction molybdenum disulfide (MoS2). Being a thick paste, it can be applied by brush or spatula. MP-50 has a performance range of -300F (-185C) to 750F (400C) for anti-seize applications. When employed in mechanical components not exposed to air, good lubrication results can be anticipated up to 2000F (1090C). Molybdenum Disulfide is nearly inert in operating conditions up to 600F (315C). If the grease vehicle should be squeezed out, disrupting normal lubrication, the moly disulfide remains to protect working surfaces. It assists in boundary lubrication by filling microscopic voids. MP-50 plates metal surfaces, reducing high points and increasing the load carrying area. It provides a low-friction shield to reduce bearing temperatures, protect working parts, prevent galling, seizure, stick-slip and heat-freeze. MP-50 adheres tenaciously to metal surfaces.

MP-50 may be applied directly to hot surfaces without running off or dripping. Conversely, it may be applied at temperatures as low as 0F (-18C). MP-50 is water resistant, withstands extreme weather elements, and helps prevent corrosion on parts exposed to water, steam, most acids and alkalis.

Benefits:

• Non-melting
• High-Temp >750F (400C)
• Prevents corrosion
• Water Resistant
• Contains high percentage MoS2
• Prevents Stick-Slip
• Lowers Friction

Specifications:

Base Materials: Organo Clay & MoS2 / Petroleum
Friction / Nut-Factor: (Nut-Factor) – 0.105 – High Chrome Alloys @ 60,000 PSI Contact Stress
Service Rating: -300F to 750F, -185C to 400C

TDS
SDS